• Small Engine Repair

  • If it doesn't fit in another forum, chances are it belongs here.
If it doesn't fit in another forum, chances are it belongs here.
 #82851  by Tim_Kerr
 Tue Nov 07, 2017 8:27 am
cunnalingus wrote:
Tue Nov 07, 2017 8:20 am
Relax timeter, I’m not mad. Now you’re doing the Demeter NO U routine lol
fucking indian
 #82864  by Kumacho
 Tue Nov 07, 2017 9:13 am
JohnnyP wrote:
Sun Nov 05, 2017 9:36 pm
Anyone on here know a lot about small engines? I've got a Husqvarna YTA22V46 riding lawn mower and the fucker will not start (if it sits for awhile) without starting fluid. It runs fine after getting it started. I thought maybe water was in the gas so I drained the tank along with the carburetor but still have the same problem.
Float needle and seat or the slow speed jets are probably clogged with varnish. So it is running lean on startup but a warm engine will run okay in a leaner state.

Do you get detonation when the engine bogs down over deep grass or under a high load?

Or some cock biter at the Husky farm didn't adjust the cable correctly causing it to run in a lean state at startup.
 #82866  by Tim_Kerr
 Tue Nov 07, 2017 9:25 am
cunnalingus wrote:
Tue Nov 07, 2017 8:30 am
Lol look at timeter go. Keep crying fag boy
glue
 #82988  by Tom_Selleck
 Wed Nov 08, 2017 12:02 am
ebaum's do it yourself auto repair:

Step 1: Open the hood
Step 2: Call it a fag for not running properly
Step 3: Suck it's dick
Step 4: photoshop it on pirates boat in a big gay gang bang
Tim_Kerr liked this
 #82993  by AngryGeriatric
 Wed Nov 08, 2017 12:33 am
Tom_Selleck wrote:
Wed Nov 08, 2017 12:02 am
ebaum's do it yourself auto repair:

Step 1: Open the hood
Step 2: Call it a fag for not running properly
Step 3: Suck it's dick
Step 4: photoshop it on pirates boat in a big gay gang bang
Step 5: Neg it and call it grummed
Tom_Selleck liked this